How to Tighten Skateboard Trucks: Best Tips for You
Almost every professional skateboarder knows how to squeeze their skateboard truck. Because they understand that the truck has a great influence on the stability of the skateboard when moving.
So what about those new to skateboarding? How to tighten skateboard trucks? Follow our sharing below to have the best way!
Why Do We Need To Tighten Skateboards?
Skateboards Are Unstable When Trucks Loosen
When the skateboard truck is loose, the wheels will not work stably. You will feel the truck easily sway and tilt. Even for beginners, skateboarding can easily fall.
You will not be able to control the skateboard well if it is constantly wobbling. Especially, on steep slopes and when the skateboard moves at high speed. The skateboard wheels will also be easier to bite.
When the skateboard truck is loose, the wheels will not work stably
The only thing you should do at this point is tightened the truck. When tightening the truck, the important joints will have a tighter connection. This makes the skateboard easier to control and less wobbly.
Tighten Up Your Skate Truck to Make It Easy for You to Control Everything
One thing that professional skaters know is that a tight truck will help stabilize the skateboard. It gives skaters an advantage in controlling the skateboard, especially beginners.
The tighter the skateboard truck, the more stable the skateboard moves. However, you should not tighten the truck too much. You should pull it moderately to make the control not too rigid.
After tightening the truck, the skateboard will work stably on the slopes and travel at high speed.
How to Tighten Skateboard Trucks?
To tighten the skateboard, we will perform the following 4 simple steps:
- Step 1: Flip the Board Over
- Step 2: Use a Wrench or Skateboard Tool to Tighten the Truck
- Step 3: Check Settings Again
- Step 4: Continue Fine-tuning and Finish
For professional skaters, these are simple steps. Maybe they’ve done it a hundred or a thousand times before.
But this job is probably entirely new for those who are new to skateboarding. To do this well, follow the steps below in detail:
Step 1: Flip the Board Over
First, we need to locate the bolts and nuts used to tighten the truck. This is an essential part of the connection between the deck and other devices.
It would be best if you turned the board upside down. Next, grab the truck by the handle and try to shake it. Feel free to tinker to see if they’re loose or too tight.
If they are too tight, then you should loosen them moderately. On the contrary, when they are loose and move a lot when impacted, you need to tighten the truck.
Step 2: Use a Wrench or Skateboard Tool to Tighten the Truck
When determining that the skateboard truck is loose, grab a wrench, skateboard tool, T skate tool, or a pair of pliers that fit over the central bolt. These are tools that can help you tighten your truck.
On the truck, there will be a lot of different bolts. Small bolts help connect the truck to the deck, so you hardly need to adjust them. What you need to tighten here is the enormous bolt. It is the central bolt that needs changing.
Put whatever tools you have that I mentioned above on the main bolt and start turning. You, please rotate clockwise to tighten the truck more.
Take and turn, then stop and test it. One piece of advice for everyone is not to tighten the truck too tight.
Step 3: Check Settings Again
After tightening, hop on your skateboard and move on. Please check its stability. If it is already stable enough and suitable for your operation, you may not need further adjustment.
When the truck is still not tight enough, it may wobble a bit and move is not stable. On the contrary, if the direction is too stiff, it is difficult for you to adjust the skateboard and its approach lacks flexibility. At this point, your skateboard is too tight.
Either way, you’ll need to make further adjustments.
Step 4: Continue Fine-tuning and Finish
As mentioned above, if you feel the skateboard moves appropriately, you can skip this step. However, everyone’s preferences are different, and you still want to adjust the skateboard tighter or looser.
The query proceeds in the same way as for the first time. You turn the skateboard upside down and use the tool to adjust the skateboard truck.
Summary
Although it is pretty simple to adjust the skateboard truck, the skateboard is an integral part of the skateboard’s movement. In this article, we have shared with you how to tighten a skateboard truck. Hopefully, through the above instructions, you can skate more professionally!